AMCR 5200, Two Phase
Power Conditioners
AMCR 5200, Two Phase
Power Conditioners
1 ~ 15 kVA
Capacity+/- 5%
Voltage regulation
10 Year Warranty
Manufactured in Mexico
Provides 100% operational reliability for any application.
Maximum protection, trusted design.
- Overload Protection
- Spike Supressor
- Automatic Shut Off
- Cool Power & Silent Operation
- Original Patents
- 99% Efficiency
Guaranteed protection for your devices and electronic equipment
Overload Protection
Protects against stress, overheating & damage due to voltage overloads of up to 400%, such as in motors, compressors or pumps with inherent fluctuating energy demands.
Spike Supressor
Also known as a surge suppressor, protects against aggressive transient voltage spikes that can permanently damage electronic components, cause overheating and significantly reduce lifespan of equipment connected directly to the power line.
Automatic Shut Off
Performs automatic shut off for the input to protect the load against dangerous voltage variations. When the voltage level comes down to safe levels, the unit reestablishes connection and operates normally.
Cool Power & Silent Operation
Unobtrusive and safe design is perfect for workspaces, as it operates silently without generating heat.
Original Patents
Designed and patented within our own Research & Development Department, allowing for custom specifications to be easily adapted.
99% Efficiency
Highly efficient operation allows for low cost operation and supports product longevity.
Robust, sleek casing.
Technical Specifications
Input
|
AMCR
|
5204
|
5206
|
5210
|
5215
|
|---|---|---|---|---|
| Capacity (kVA / kW) | 4/4 | 6/6 | 10/10 | 15/15 |
| Input Voltage (V) | 120/208 | |||
| Overload Protection | Thermo-magnetic switch on the output/ fuse (varies by model) | |||
| Range (Accepted) | ± 15% | |||
| Operational Frequency | 60 ± 10%, does not alter frequency* | |||
| Harmonic Distortion | Less than 2 % THD | |||
| Power Factor | Does NOT alter, adaptable to load requirement | |||
* Tolerance available under evaluation of the Engineering department
Output
|
AMCR
|
5204
|
5206
|
5210
|
5215
|
|---|---|---|---|---|
| Voltage Regulation Range | ± 5% | |||
| Power Supply Impedance | Less than 2% | |||
| Sustained High/Low Voltage Protection | Contactor or relay on the output, automatic shut off (varies by model) | |||
| Correction Time | Immediate, (8.3 milliseconds, 1/2 cycle) | |||
| Reset | Automatic (programmed at factory) | |||
| Reset Time | 3 second standard time ** | |||
** Factory configurable up to 6 kVA on request
Physical & Mechanical
|
AMCR
|
5204
|
5206
|
5210
|
5215
|
|---|---|---|---|---|
| Recommended Use | Domestic, commercial and/or industrial, non vibratory, indoor use | |||
| Input / Output Connectors | Terminal block (clamps) (G, N, L1, L2)** | |||
| Transformers | Electrolytic copper magnetic wire and silicon steel sheet | |||
| Cooling & Ventilation | Natural convection | |||
| Cabinet | Galvanized steel sheet metal | |||
| Paint Finish | Primer and electrostatic epoxy powder coating | |||
| Maximum Altitude Of Operation (mamsl) | 3,000 | |||
| Operational Temperature (°C) | 0 ~ 40 | |||
| Relative Humidity | 0 ~ 95% without condensation | |||
| Dimensions, height x width x depth (mm) | 460 x 270 x 450 | |||
| Weight (kg) | 18 | 21 | 28 | 35 |
** Factory configurable up to 6 kVA on request
Technology
|
AMCR
|
5204
|
5206
|
5210
|
5215
|
|---|---|---|---|---|
| High Frequency Noise Protection | PI Filter | |||
| Control Technology | Microcontroller | |||
| Monitoring (Operational Status) | LEDs / Digital display with LEDs (vary by model) | |||
| Measurement Parameters | Voltage, current, power and kWh | |||
| Electronic Commutation | TRIACs | |||
Electrical
|
AMCR
|
5204
|
5206
|
5210
|
5215
|
|---|---|---|---|---|
| Transformer | Type H | |||
| Spike Suppressor | Varistors on the output | |||
| Efficiency | 98% minimum | |||
| Overload Capacity | Up to 400% in intermittent startups | |||
Request quote
Power Calculator
Instantly calculate equipment capacity by filling in the missing information:
